Currently Browsing: Home Improvement


Credit: How to replace windows

Windоw ѕсrееnѕ аrе соmmоnlу dаmаgеd due tо оbjесtѕ inаdvеrtеntlу роking thrоugh thеm. Lеft unattended, уоur hоmе саn be ѕuѕсерtiblе to insect penetration. In аdditiоn, ѕоmеtimеѕ раint саn spill оn them when painting thе house and mаkе thеm lооk unѕightlу. Fоrtunаtеlу replacing a window ѕсrееn is еаѕу to do аnd iѕ inexpensive.

You саn change thе ѕсrееning easily—and with little соѕt fоr mаtеriаlѕ аnd tооlѕ—bу following these basic inѕtruсtiоnѕ.


– Screening

– Sрlinе (рlаѕtiс cording)

– Rоlling ѕрlinе tool (оftеn packaged with thе spline соrding)

– Nаil рunсh оr small flаt-hеаd ѕсrеwdrivеr

– Sсiѕѕоrѕ

– Small сlаmрѕ оr tаре

– Utlitiу knife


  1. Remove thе оld ѕсrееn. Thе screen iѕ held in рlасе with a plastic соrd (ѕрlinе) thаt runѕ in a сhаnnеl around thе реrimеtеr оf thе metal frаmе. Uѕе a ѕmаll flаt-hеаd ѕсrеwdrivеr, nаil рunсh, оr ѕhаrр оbjесt tо lift thе ѕрlinе оut of thе сhаnnеl. Remove the old screen аnd diѕсаrd it аlоng with thе оld рlаѕtiс соrding. If the frаmе is dirty, nоw wоuld bе a gооd timе tо wash it dоwn.
If you need an expert; I did recommend, as i have used them before.
  1. Sizе thе new material. Plасе thе mеtаl frаmе оn a flаt ѕurfасе аnd rоll оut a length оf screening mаtеriаl tо cover the еntirе frаmе. Leave a 2” bоrdеr аrоund thе реrimеtеr and сut thе ѕсrееn to ѕizе.
  2. Pоѕitiоn thе nеw ѕсrееn. Lау thе nеwlу ѕizеd ѕсrееning mаtеriаl over thе frаmе, mаking ѕurе that the mаtеriаl overlaps the mеtаl on аll fоur ѕidеѕ. (Nоtе: ѕinсе thе screening mаtеriаl was rоllеd, соnѕidеr placing it with thе сurvеd side down. It will mаkе it еаѕiеr to wоrk with.) Pull thе ѕсrееning taut аnd tаре оr сlаmр to thе top аnd bоttоm оf the frame.
  3. Inѕеrt thе new spline. Stаrting аt one ѕidе аnd working уоur wау аrоund thе реrimеtеr of thе frаmе, uѕе thе convex whееl оf thе rolling tооl tо push the screen intо the channel of thе frаmе. Be sure tо kеер the mаtеriаl tаut аѕ уоu wоrk уоur wау аrоund, thеn uѕе the concave ѕidе of thе ѕаmе tool tо inѕеrt thе рlаѕtiс ѕрlinе. Once уоu have inѕtаllеd the ѕрlinе, trim thе еxсеѕѕ material with a utility knifе and inѕtаll уоur new rерlасеmеnt ѕсrееn in thе windоw.


How to Measure Patio Umbrella Size

Umbrellas help keep your courtyard and patio tables cooler, providing shade from the sun. They can also help provide shade for your chair cushions to prevent the sun from fading them. You need to know what size of umbrella you need to cover your desired area before you buy an umbrella. You can measure your current umbrella size if you are looking to replace the one you have. This is same step i took when replacing my patio in St. Louis and it works great.

How to measure patio umbrellas

The size of patio umbrella is determined in width and not height. To find the correct measurements, measure the distance between the upper arm of the rib and the lower arm of the rib. Then multiply by two, which will give the right size. You can also follow the steps below:

  • Open the umbrella so that it is fully extended.
  • Measure the top of your umbrella along one of the arms of the ribs. Use a tape to measure the distance from the top center to the outer edge.
  • Multiply that number by half. This will give you the right size of your umbrella. Remember that umbrellas are not measured by height but width.
  • Take another measurement from the base of the umbrella pole to the crank mechanism. This will give you the exact measurement of the crankshaft height. You should know this measurement if you are measuring for a patio table.

There are hundreds of umbrella manufacturers all over the world. Most umbrella manufacturers build their own individual umbrella specifications, which means that not all umbrellas are created equal or constructed to the same length, diameter and thickness. Most umbrellas are very wide, reaching to several inches depending on the manufacturer. Example. A true 9 inch umbrella span would be 108 inches (12 “x 9” = 109 “) However, the rib arms can reach several centimeters plus or minus, making the measurement of any umbrella greater or less than the actual 109 inches.


The following are the steps involved in changing a broken garage door spring.

1. Put a C-clamp on the garage door track above the bottom-most door roller to secure the door in place.

2. The movable end of the string are attached to an adjustment collar and there is a set screw in the adjustment collar which hold the spring in a tension position on the center shaft. Around the perimeter of the adjustment collar are a series of hole and you will have to insert a metal rod into one of the holes.

3. Before making any adjustments, take note of the original position of the set screw to know if there are “flats” that the set screw should be set into. They are special flattened or depressed areas of the shaft that allow the set screw to hold more securely.

4. Make sure the adjusting rod is solidly in the hole in the collar. Also,ensure that the set screw is loosened while the rod is held in position. Use the rod to turn the collar to loosen or tighten the tension on the spring. Tighten the set screw to lock collar the new position while holding the collar in the new position. Adjust the torsion springs equally to assure balance in the door.

5. Determine the proper direction to turn the collar. To increase the opening force, the collar must be turned in the same direction that the garage door cable passes over the pulley and to decrease the closing force, the collar should be turned in the opposite direction that the garage door cable passes over the pulley .

6. Make adjustments in small increments. To fine-tune a difficult door, 1/4 turn at a time is enough. Balance both springs by turning them in the same amount.

In summary, things could get screwed up, so if you are not technically incline and slow to learning things like this, i did advice you hire a professional for a penny to fix it. I myself isn’t that fantastic when it comes to technical stuff as these, so i always employ the help of a neighbor, who is a  St. Louis garage doors dealer.

And that’s that, hope you had a nice read and looking forward to sharing more stuff with you 🙂

Why you should use energy efficient windows

Many homeowners go through a lot of pain to replace their old windows. Not only does it take a lot of work to do window replacement but it can also cost a lot of money. This is one of the reasons why homeowners are tempted to keep their costs down and choose the replacement windows that are the cheapest rather than the most energy-efficient which may cost up to 15% more. However, choosing energy efficient and high quality windows can have a substantial benefit in the long run. Here are a few reasons why you should choose energy efficient windows.

Better insulation

You will be surprised to realize how energy efficient windows can be as they are able to keep the outdoor elements at bay and can eliminate the cold and hot spots in a room. The windows are good at forming a barrier against the cold weather to ensure that you home remains warm during winter and protect the interior from the hot summer sun. This keeps your room cool and pleasant even if you do not have air conditioner.

Good for the environment

Just like the name suggest, energy efficient windows are able to keep the temperature at your home at a level that is comfortable without your heater or air conditioner working as hard it would normally do. This will result in lower usage of energy and it means that your home will need less power as compared to what fossil-fuel such as natural gas and coal power plants generates. This will play a role in making your home eco-friendly.

Lower costs

Consuming less energy for cooling and heating will translate into making some savings. You may also be aware that most municipalities will offer you significant tax credit if you upgrade to windows that are energy efficient. This can be good news if you are trying to cut you your budget.

Protecting your belongings

Energy-efficient windows usually have a special coating that is able to block the ultraviolet rays of the sun. The rays can cause damage to your items such as carpets, fabrics, woods and furniture when the streams of sunlight get through the windows. Since 98 percent of the rays of the sun do not get into the home, you should not expect to see any deterioration or fading on the home flooring, furnishing and accessories.

Reducing noise

One of the key benefits of the energy-efficient windows that are highly insulative is that they have a soundproofing ability. Since these do well in sealing out the exterior conditions, it is possible to prevent you home from noise from railroads, sirens as well as roadway traffic. This can be a very good thing in this age where most areas are congested with homes built close to one another.

Less maintenance

Since windows that are energy efficient are able to minimize the transfer of energy, it is possible to considerably reduce the cases of condensation buildup. This means that the risk of molds is considerably lowered. It also creates a more conducive environment for people who may be suffering from asthma. Resulting to efficient window replacement in St. Peters where i stay, has really lowered the high level of expenses on maintaining windows.

How Much It Costs To Replace a Garage Door

If your garage door has started malfunctioning, you might consider installing a new door. One of the best moment to do these is when you are in the process or about to finish your basement remodeling. This is surely a smart investment. In fact, installing a new garage door produces about 84 percent of the value of resale, according to Remodeling magazine. In addition to getting a solid return on investment, new garage doors will enhance functionality, improve the appearance outside the home, and protect the entrance of your house and contents of your garage. Due to the fact that installation of garage doors is a job that involves electrical work, hard work and removing the old garage door, you probably need to work with a professional garage door.

A garage door costs between $200 for a single door to $4,000 for two or more doors, with doors with better materials amounting to larger cost. Most home owners claim to spend about $ 1,063 for the door and the installation. The total price must include the purchase of new tracks with which the door would move on and adhesives, connectors and fasteners. You can save money and time by placing the door yourself. But the weight of a door can pose serious risks. If you think you want to try installing it yourself, be sure to choose a garage door that can be safely managed.

The insulation that increases energy efficiency and also helps in the reduction of electricity bills is crucial when the garage door is being installed to the house. Doors with high R-value are preferred In this case. This means that the heat can be kept in because of better insulation. The higher the R value, the better insulated the garage will be against the outside no ise and the cold and warm air. Doors that are well insulated will have polystyrene or polyurethane foam in their construction.

Some other factors that must be kept in mind when replacing a garage door include:

Pinch Resistance: which tries to push fingers out of the way if they’re way too close to a door.

Tamper Resistance: which reduces injury risk from components of door. .

How to Keep Your Carpet Insect Free

A carpet gives your home a stylish aesthetic, more soft and comfortable floor to step on. However, the carpet could be a perfect breeding ground for insects, but fortunately, the simple guide below will help you keep your carpet free of insects.

Cleanliness matters

To clean your carpets should be one of the first things you should always worry of. Yes, regular vacuuming help, but they cannot remove all particles. Materials or organic oil can be introduced into the carpet fibers. Both organic matter and oils can attract insects to your home. Some of these insects can cause serious damage to your carpet, especially carpet beetles or moths that could feed on the fabrics of your carpet.

You must do everything to have your carpet regularly maintained to prevent infestation or the need to replace your carpet before it’s due.

Other insects that may be hiding in your carpet like cockroaches release particles that are airborne that can give you or members of your family allergic reactions, especially if anyone of you is suffering from asthma.

Add an extra layer of protection

Purchasing food-grade diatomaceous earth is another option you should consider as they are usually not too expensive. You can find it online or in your local health food store. This powder is fossilized algae-like organisms.

The powder has several sharp edges which makes it an effective and natural insect repellent. These edges do not pose a threat to you, simply because they are too small to harm a human. But insects are seriously wounded when they come in touch with the powder, which is why they avoid it. Diatomaceous earth helps against carpet beetles, insects, roaches and other small insects.

All you have to do is put some powder in a shaker or something and sprinkle a little around the carpet. Small fibers in your carpet should be able to keep the dust in place, so you do not have to worry about small particles floating around your home.

Just be sure enough that you do not see sprinkle dust on the carpet because you do not need so much. You do not have to replace diatomaceous earth until it is time for cleaning.

As you can see, there are easy ways to keep your house and carpets free of pest which can actually be done safely. If you find it difficult, you can as well hire an expert, I did hire an expert carpet cleaner in O’Fallon that helped with one of my apartment. its also important to mention that keeping your carpet clean and free of insects will help you get the most out of your carpet.

« Older Entries